The choice unfinished furniture kits fitting method is often determined by the desired height of. Your awning. Brief Introduction to Awning Fitting Fitting of awnings is essential for.
The stability of the awning. The reason for the fitting being crucial, is that this is the. Weakest link in the strength of the awning, because it is what binds awning and foundation together. For a wind class III awning, the fitting will break before the unfinished furniture kits.
Itself, in case of strong wind. Number of Necessary Mountings The number of necessary mountings. For an awning highly depends on the quality of the awning. As a rule of thumb, one mounting is needed for. Every arm unfinished furniture kits the awning. Awnings up to approximately 6,5 meters usually have two arms. Needing two mountings, whereas lengths from 6,5 to 8 meters usually have three arms needing 3 mountings. Where on an Awning to put the Mountings It is important. That the mountings are fitted on the awning, close th where the retractable arms are mounted in the awning cassette.
This provides the optimal transfer of the force on. The awning to the wall or rafters or roof, on which the awning is fitted. Some awnings have movable arms. This gives an ability to move the arms, so that. They correspond to where it is desired to put the mountings. This is relevant in the case of rafter fitting. Where the location of the mountings is determined by the location of the roof rafters. In this case it is best if the arms. Are moved so they are in front of the rafters, again to render possible unfinished furniture kits force transfer from awning to rafters.
Awning Fitting on Vertical Wall This is the standard fitting of an awning. And also the least troublesome. The only demand here is that the wall is stable enough. To carry the awning. A simple test of the quality of the wall is to.
Read more...